2 kinds of cutting methods, corresponding to 2 different cutting saw blade material to choose

 

Hot saw selection of manganese steel cutting saw blade: manganese steel saw blade high-speed rotation to cut steel pipe, in the cut off process, saw blade and steel pipe local temperature is very high, it is a kind of burned off. High burn marks can be seen on the surface.

Flying cold saw uses HSS saw blades: HSS saw blade is slowly rotating, milling process to cut off the welding pipe, so it can do no burr and no noise. Cutting speed and process with fully optimization; Improve the precision of erw pipe cut off performance. Also, the service life of saw blade reaches maximum.

Flying cold cut off process only has a little heat, avoid the change of internal stress and material properties at the cut section, and the saw blade has little pressure force on the steel pipe, and will not form the deformation of the tube wall and tube mouth. The quality of cutting end face of workpiece processed by HSS cold cutting saw is perfect.

The optimized cutting method is selected, the section after cutting has high precision, no burr inside the surface, the cutting surface is flat and smooth, and there is no need for flat chamfering and other subsequent processing (reduce the processing intensity of the next process), saving the process and raw materials; Operator fatigue is low, improve working efficience; The flying cold saw cutting process has no sparks, no dust, no noise; Environmental protection and energy saving.

So, what is your idea about your cutting project?