The difference between the cutting control of hot saw and flying cold saw

 

Feeding Speed,

Nomally, the hot saw is through the cylinder power to cut the steel pipe with a big force knife friction cut.

This process by flying cold cutting saw is called feeding. The feed is controlled by servo motor, so the feeding process of flying cold cutting can be controlled very accurately. 

Our powerful CT-III controller can reasonably calculate the feeding curve base on your pipe sizes, to ensure a lonoger service life of the saw blade. 

Rotation Speed

Compared with the hot saw, the rotation speed of the cold saw blade can be controlled, too. But, the hot saw unit, the rotation speed is always the same speed, and it is a high rotation speed.

The speed of the cold cutting saw blade can be controlled by flying cold cutting system. As we know, the faster the speed, the higher the temperature; The higher the temperature, the lower the hardness. By means of setting to ensure the service life of the saw blade. This is about the setting of sawing parameters. Thus, the work process of cold cutting saw is more intelligent and accurate, not rough, and can ensure the service life of the saw blade to the greatest extent. Because the price of cold saw cut off blade is very expensive, the quality of flying cold saw determines the length of the service life of the saw blade.

Quality Flying Cold Saw, always welcome the quality customer, right?

Checking the video for Profile Milling Type Flying Cold Saw Cut Off With Double Blades

Why choose the tube mill Flying Cold Saw Cut Off ?